The DiagProg III Speedometer Programming Computer has the following outstanding properties:
- Programming procedure is mostly carried out through the in car diagnostic plug.
- In Circuit EEprom programing. (that means you dont have to desolder the chip)
- Only the relevant data are changed; incorrect programming is virtually excluded.
- Even complete data blocks can be changed.
- Software update features through the Internet or by means of a USB 2.0
- Specialised software, which enables data transfer between the appliance and a PC computer, attached to the tester
- Easy to use device menu .
- Before alteration of mileage in each car device shows you type of cable/connecctor that you must use, and name of dedicated *.pdf file where you can find detailed description.
- Backup/Restore function. For safety reasons, the current mileage is decoded, displayed and changed data are stored in DiagProg III.
- The data are saved in the hand-held unit and may be transmitted to a PC for filing.
- All data my be edited, saved and loaded.
- 8MB flash-memory, expandable by Multimedia flash card to 136 MB (for customer's order)
- Moreover, software updates can be made easily via our internet-update-function.
- 320 x 240 colour display with 256 colours (Made in Japan), touch screen controler with autocalibration
- Two board constuction what is simple and low cost in service
- Device is equiped with cables for diagnostic sockets, connectors and eeproms connectors, Instruction Manual in Polish or English.
